Polyether (PTMEG) TDI Prepolimer untuk Ban dan Roda Gerobak
dapatkan harga terbaruJenis pembayaran: | L/C,T/T,D/P |
Inkoterm: | FOB,CFR,CIF |
Min. Memesan: | 1000 Kilogram |
Transportasi: | Ocean |
Pelabuhan: | Shanghai |
Jenis pembayaran: | L/C,T/T,D/P |
Inkoterm: | FOB,CFR,CIF |
Min. Memesan: | 1000 Kilogram |
Transportasi: | Ocean |
Pelabuhan: | Shanghai |
Model No: XCPU-M135
Merek: Bahan Kimia Xuchuan
Tempat Asal: Cina
Jenis Dari: Resin Sintetis Dan Plastik
Name Of Products: XCPU-M135
Appearances: solid
Features: Water resistance, low temperature resistance, mildew resistance
Application: Typical uses of this polymer include forklift truck tyres, rolls, and gears, die pads etc.
Package(kg): 20/200
Brand: Xuchuan
POLYETHER(PTMEG) TDI PREPOLYMER XCPU-M135 |
1, Produk ini adalah Polytetrahydrofuran Ether Polyo L (PTMEG) dan Toluene Diisocyanate (T- 10 0) Sintesis Prepolimer Polyether Polyurethane
2, Fitur: Resistensi Air, Resistensi Suhu Rendah, Resistensi Ildew
3, aplikasi : Penggunaan khas polimer ini termasuk ban truk forklift, gulungan, dan roda gigi, pembalut die dll.
4, spesifikasi produk
Name of products |
Appearances |
Viscosity(mPa.s/85℃) |
NCO% content |
Package(kg) |
XCPU-M135 |
solid |
1200-1300 |
3.50-3.70 |
20 / 200 |
5, Kondisi Pencampuran dan Curing
MOCA Level |
Recommended % Theory |
Prepolymer Temperature |
Curative Temperature |
Pot Life |
Demould Time |
Post Cure Time |
% |
% |
℃ |
℃ |
mins |
@ 100°C (hrs) |
@ 100°C (hrs) |
10.5 |
95 |
75-85 |
110-120 |
11-12 |
1 |
10 |
6 , Prosedur Pemrosesan:
Prapolimer pada 75 ~ 85 ℃ pemanasan awal, setelah degassing vakum, pencampuran moca yang baik, pencampuran homogen yang baik, deeaeration, tuangkan, cetakan, cetakan vulkanisasi, pengupasan, vulkanisasi.
CPU untuk roda ban
7, sifat fisik
Properti yang disajikan di bawah ini akan digunakan sebagai panduan dan tidak dimaksudkan untuk tujuan spesifikasi.
Roda roda gigi casting pu
Hardness |
Shore A |
85 |
Tensile Strength |
MPa |
27 |
100% Modulus |
MPa |
5.4 |
300% Modulus |
MPa |
9.6 |
Angle Tear Strength, Die C |
kN/m |
65 |
Trouser Tear Strength |
kN/m |
21 |
Elongation |
% |
550 |
Resilience |
% |
61 |
DIN Abrasion Resistance 10N |
mm 3 |
39 |
Cured Specific Gravity |
g/cm3 |
1.07 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.